Hi,
ich doktor’ schon eine ganze weile an meinem Dualheadsystem rum. Ich hab
einen 17′ und einen 15′ Röhrenmonitor. Der kleine Bildschirm, der der
zweite sein soll, ist aber warum auch immer nur ein Klon vom ersten und
zeigt einen Fehler bei der Bildwiederholfrequenz … ich poste euch
einfach mal meine xorg.conf … ich hab davon leider nicht so viel Ahnung
und Sax2 scheint mich nicht so viel weiter zu bringen … ich nutze
jedenfalls SuSE9.3 und eine Nvidia NX6600.
thx
Franz
# /…/
# SaX generated X11 config file
# Created on: 2005-08-18T21:39:54+0200.
#
# Version: 4.8
# Contact: Marcus Schaefer , 2002
#
# Automatically generated by [ISaX] (4.8)
# PLEASE DO NOT EDIT THIS FILE!
#
Section “Files”
FontPath “/usr/X11R6/lib/X11/fonts/misc:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/local”
FontPath “/usr/X11R6/lib/X11/fonts/75dpi:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/100dpi:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/Type1”
FontPath “/usr/X11R6/lib/X11/fonts/URW”
FontPath “/usr/X11R6/lib/X11/fonts/Speedo”
FontPath “/usr/X11R6/lib/X11/fonts/PEX”
FontPath “/usr/X11R6/lib/X11/fonts/cyrillic”
FontPath “/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/latin2/Type1”
FontPath “/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/baekmuk:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/japanese:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/kwintv”
FontPath “/usr/X11R6/lib/X11/fonts/truetype”
FontPath “/usr/X11R6/lib/X11/fonts/uni:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/CID”
FontPath “/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/hellas/Type1”
FontPath “/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/xtest”
FontPath “/opt/kde3/share/fonts”
InputDevices “/dev/ttyS0”
InputDevices “/dev/ttyS1”
InputDevices “/dev/ttyS2”
InputDevices “/dev/ttyS3”
InputDevices “/dev/ttyS4”
InputDevices “/dev/ttyS5”
InputDevices “/dev/ttyS6”
InputDevices “/dev/ttyS7”
InputDevices “/dev/ttyS8”
InputDevices “/dev/psaux”
InputDevices “/dev/logibm”
InputDevices “/dev/sunmouse”
InputDevices “/dev/atibm”
InputDevices “/dev/amigamouse”
InputDevices “/dev/atarimouse”
InputDevices “/dev/inportbm”
InputDevices “/dev/gpmdata”
InputDevices “/dev/mouse”
InputDevices “/dev/usbmouse”
InputDevices “/dev/adbmouse”
InputDevices “/dev/input/mice”
InputDevices “/dev/input/event0”
InputDevices “/dev/pointer0”
InputDevices “/dev/pointer1”
InputDevices “/dev/pointer2”
InputDevices “/dev/pointer3”
EndSection
Section “ServerFlags”
Option “AllowMouseOpenFail”
Option “RandR” “on”
EndSection
Section “Module”
Load “glx”
Load “type1”
Load “extmod”
Load “dbe”
Load “freetype”
Load “v4l”
EndSection
Section “InputDevice”
Driver “kbd”
Identifier “Keyboard[0]”
Option “Protocol” “Standard”
Option “XkbLayout” “de”
Option “XkbModel” “pc105”
Option “XkbRules” “xfree86”
Option “XkbVariant” “nodeadkeys”
EndSection
Section “InputDevice”
Driver “mouse”
Identifier “Mouse[1]”
Option “Buttons” “10”
Option “Device” “/dev/input/mice”
Option “Name” “PS2++ Logitech MX Mouse”
Option “Protocol” “explorerps/2”
Option “Vendor” “Sysp”
Option “ZAxisMapping” “4 5”
EndSection
Section “Monitor”
Option “CalcAlgorithm” “CheckDesktopGeometry”
DisplaySize 320 240
HorizSync 31-68
Identifier “Monitor[0]”
ModelName “1024X768@85HZ”
VendorName “–> VESA”
VertRefresh 50-85
UseModes “Modes[0]”
EndSection
Section “Monitor”
Option “CalcAlgorithm” “CheckDesktopGeometry”
HorizSync 31-37
Identifier “Monitor[1]”
ModelName “640X480@75HZ”
VendorName “–> VESA”
VertRefresh 50-75
UseModes “Modes[1]”
EndSection
Section “Modes”
Identifier “Modes[0]”
Modeline “1280×1024” 114.54 1280 1360 1496 1712 1024 1025 1028 1062
Modeline “1024×768” 94.50 1024 1072 1168 1376 768 769 772 808
Modeline “640×480” 25.10 640 656 720 800 480 481 484 498
Modeline “640×480” 29.84 640 664 728 816 480 481 484 501
Modeline “640×480” 34.80 640 672 736 832 480 481 484 504
EndSection
Section “Modes”
Identifier “Modes[1]”
Modeline “640×480” 25.10 640 656 720 800 480 481 484 498
Modeline “640×480” 29.03 640 664 728 816 480 481 484 501
Modeline “640×480” 31.50 640 656 720 840 480 481 484 500 -HSync
-VSync
EndSection
Section “Screen”
DefaultDepth 24
SubSection “Display”
Depth 15
Modes “1280×1024”
EndSubSection
SubSection “Display”
Depth 16
Modes “1280×1024”
EndSubSection
SubSection “Display”
Depth 24
Modes “1024×768”
EndSubSection
SubSection “Display”
Depth 32
Modes “640×480”
EndSubSection
SubSection “Display”
Depth 8
Modes “1280×1024”
EndSubSection
Device “Device[0]”
Identifier “Screen[0]”
Monitor “Monitor[0]”
EndSection
Section “Screen”
DefaultDepth 16
SubSection “Display”
Depth 15
Modes “640×480”
EndSubSection
SubSection “Display”
Depth 16
Modes “640×480”
EndSubSection
SubSection “Display”
Depth 24
Modes “640×480”
EndSubSection
SubSection “Display”
Depth 4
Modes “640×480”
EndSubSection
SubSection “Display”
Depth 8
Modes “640×480”
EndSubSection
Device “Device[1]”
Identifier “Screen[1]”
Monitor “Monitor[1]”
EndSection
Section “Device”
BoardName “GeForce 6600 GT (0x00F2)”
Driver “nvidia”
Identifier “Device[0]”
Screen 0
Option “Rotate” “off”
VendorName “NVidia”
EndSection
Section “Device”
BoardName “GeForce 6600 GT (0x00F2)”
Driver “nvidia”
Identifier “Device[1]”
Screen 0
Option “Rotate” “off”
VendorName “NVidia”
EndSection
Section “ServerLayout”
Identifier “Layout[all]”
InputDevice “Keyboard[0]” “CoreKeyboard”
InputDevice “Mouse[1]” “CorePointer”
Option “Clone” “off”
Option “Xinerama” “off”
Screen “Screen[0]”
Screen “Screen[1]” LeftOf “Screen[0]”
EndSection
Section “DRI”
Group “video”
Mode 0660
EndSection
Section “Extensions”
EndSection
hi,
also meiner meinung nach liegt dein problem darin das deine config in bezug auf den nvidia treiber total falsch ist. dual-head wird bei nvidia ungefähr so configuriert (auszug aus einer config die ich vor 2 jahren benutzt habe ;):
Section “Device”
BoardName “GEFORCEDDR”
BusID “1:0:0”
Driver “nvidia”
Identifier “Device[0]”
VendorName “Nvidia”
Option “NoLogo” “on”
# Option “UseInt10Module” “on”
Option “TwinView”
Option “SecondMonitorHorizSync” “30-50”
Option “SecondMonitorVertRefresh” “60”
# Option “TwinViewOrientation” “Clone”
Option “TwinViewOrientation” “RightOf”
Option “MetaModes” “800×600,800×600; 800×600, 1024×768; 640×480, 640×480”
Option “ConnectedMonitor” “crt,crt”
## Option “ConnectedMonitor” “TV”
## Option “TVStandard” “PAL-G”
## Option “TVOutFormat” “SVIDEO”
EndSection
sprich EINE device/screen/mode-config section für beide monitore. siehe hierzu in der NVIDIA Readme [1]: Appendix G. Configuring Twinview
fejf
[1] ftp://download.nvidia.com/XFree86/Linux-x86/1.0-7664/README.txt
sry … aber ich glaub das führt mich nicht auf einen grünen Zweig … aber Danke für den Link! Da findet sich nämlich u.a. folgendes:
Appendix P. Configuring Multiple X Screens on One Card
__________________________________________________________________________
Graphics chips that support TwinView (Appendix G) can also be configured to
treat each connected display device as a separate X screen.
While there are several disadvantages to this approach as compared to TwinView
(eg: windows cannot be dragged between X screens, hardware accelerated OpenGL
cannot span the two X screens), it does offer several advantages over
TwinView:
If each display device is a separate X screen, then properties that
may vary between X screens may vary between displays (eg: depth, root
window size, etc).
Hardware that can only be used on one display at a time (eg: video
overlays, hardware accelerated RGB overlays), and which consequently
cannot be used at all when in TwinView, can be exposed on the first X
screen when each display is a separate X screen.
The 1-to-1 association of display devices to X screens is more
historically in line with X.
To configure two separate X screens to share one graphics chip, here is what
you will need to do:
First, create two separate Device sections, each listing the BusID of the
graphics card to be shared, each listing the driver as “nvidia”, and assign
each a separate screen:
Section “Device”
Identifier “nvidia0”
Driver “nvidia”
# Edit the BusID with the location of your graphics card
BusID “PCI:2:0:0”
Screen 0
EndSection
Section “Device”
Identifier “nvidia1”
Driver “nvidia”
# Edit the BusID with the location of your graphics card
BusId “PCI:2:0:0”
Screen 1
EndSection
Then, create two Screen sections, each using one of the Device sections:
Section “Screen”
Identifier “Screen0”
Device “nvidia0”
Monitor “Monitor0”
DefaultDepth 24
Subsection “Display”
Depth 24
Modes “1600×1200” “1024×768” “800×600” “640×480”
EndSubsection
EndSection
Section “Screen”
Identifier “Screen1”
Device “nvidia1”
Monitor “Monitor1”
DefaultDepth 24
Subsection “Display”
Depth 24
Modes “1600×1200” “1024×768” “800×600” “640×480”
EndSubsection
EndSection
(note: you’ll also need to create a second Monitor section) Finally, update
the ServerLayout section to use and position both Screen sections:
Section “ServerLayout”
…
Screen 0 “Screen0”
Screen 1 “Screen1” leftOf “Screen0”
…
EndSection
For further details, please refer to the XF86Config(5x) or xorg.conf(5x)
manpages.
Was ich nochmal probiert hab ist bei meinem zweiten Device-Eintrag “Screen” auf 1 zu setzen, aber geändert hat sich leider nichts … es sieht wirklich danach aus also ob auf dem zweiten Monitor ein Klon vom ersten Monitor ankommt, bloß der zweite Monitor kommt eben mit 1024×768 nicht zurecht, sondern geht nur bis 800×600.
thx
hi,
scheinbar hat nvidia die configuration doch etwas geändert seit dem ich mir dass das letzte mal angeschaut habe ;) dennoch:
änder beim 2. monitor folgende zeile:
Modes “1600×1200” “1024×768” “800×600” “640×480”
in:
Modes “800×600” “640×480″
oder click einfach mal mit der maus (einfach links aus dem 1. bildschirm rausfahren ;) auf den 2. monitor und drück dann strg+alt+”+”
desweiteren kannst du die frequenz für den zweiten monitor seperat einstellen (hier für 640×480@60Hz laut xorg.conf.example):
Section “Monitor1”
Mode “640×480”
DotClock 25.175
HTimings 640 664 760 800
VTimings 480 491 493 525
EndMode
EndSection
und btw: wenn du noch probleme hast schreib mir einfach mal eine mail an spammail01@gmx.net weil ich das hier normal nicht mitbekomme wenn du was schreibst ;)
fejf