Hallo,

ich habe mir vor kurme eine Rollei RCD-6324 Digitalkamera gekauft.
Ich krieg’ die allerdings hier bei mir auf einer OpenSuse 10.2 nicht zum Laufen, sprich: Ich würde die Kamera gerne mounten, um die Fotos auf den PC zu bekommen.
Soweit ich sehen kann, wird die Kamera erst mal auch richtig erkannt; ein Blick in /var/log/messages zeigt:
Oct 7 20:03:57 skywalker kernel: ohci_hcd 0000:00:13.2: wakeup
Oct 7 20:03:58 skywalker kernel: usb 4-2: new full speed USB device using ohci_hcd and address 2
Oct 7 20:03:58 skywalker kernel: usb 4-2: new device found, idVendor=0784, idProduct=1691
Oct 7 20:03:58 skywalker kernel: usb 4-2: new device strings: Mfr=1, Product=2, SerialNumber=0
Oct 7 20:03:58 skywalker kernel: usb 4-2: Product: ROLLEI
Oct 7 20:03:58 skywalker kernel: usb 4-2: Manufacturer: ROLLEI
Oct 7 20:03:58 skywalker kernel: usb 4-2: configuration #1 chosen from 1 choice
Oct 7 20:03:58 skywalker kernel: Initializing USB Mass Storage driver…
Oct 7 20:03:58 skywalker kernel: scsi4 : SCSI emulation for USB Mass Storage devices
Oct 7 20:03:58 skywalker kernel: usb-storage: device found at 2
Oct 7 20:03:58 skywalker kernel: usb-storage: waiting for device to settle before scanning
Oct 7 20:03:58 skywalker kernel: usbcore: registered new driver usb-storage
Oct 7 20:03:58 skywalker kernel: USB Mass Storage support registered.
Oct 7 20:03:59 skywalker kernel: Vendor: ROLLEI Model: RCP-6324 Rev: 1.00
Oct 7 20:03:59 skywalker kernel: Type: Direct-Access ANSI SCSI revision: 02
Oct 7 20:03:59 skywalker kernel: SCSI device sdb: 3970048 512-byte hdwr sectors (2033 MB)
Oct 7 20:03:59 skywalker kernel: sdb: Write Protect is off
Oct 7 20:03:59 skywalker kernel: sdb: Mode Sense: 1f 00 00 08
Oct 7 20:03:59 skywalker kernel: sdb: assuming drive cache: write through
Oct 7 20:03:59 skywalker kernel: SCSI device sdb: 3970048 512-byte hdwr sectors (2033 MB)
Oct 7 20:03:59 skywalker kernel: sdb: Write Protect is off
Oct 7 20:03:59 skywalker kernel: sdb: Mode Sense: 1f 00 00 08
Oct 7 20:03:59 skywalker kernel: sdb: assuming drive cache: write through
Oct 7 20:03:59 skywalker kernel: sdb: sdb1
Oct 7 20:03:59 skywalker kernel: sd 4:0:0:0: Attached scsi removable disk sdb
Oct 7 20:03:59 skywalker kernel: sd 4:0:0:0: Attached scsi generic sg1 type 0
Oct 7 20:03:59 skywalker kernel: usb-storage: device scan complete
Oct 7 20:05:00 skywalker kernel: usb 4-2: reset full speed USB device using ohci_hcd and address 2
Oct 7 20:05:30 skywalker kernel: usb 4-2: reset full speed USB device using ohci_hcd and address 2
Oct 7 20:05:30 skywalker kernel: usb 4-2: reset full speed USB device using ohci_hcd and address 2
Oct 7 20:06:00 skywalker kernel: usb 4-2: reset full speed USB device using ohci_hcd and address 2
Oct 7 20:06:01 skywalker kernel: sd 4:0:0:0: scsi: Device offlined – not ready after error recovery
Oct 7 20:06:01 skywalker kernel: sd 4:0:0:0: SCSI error: return code = 0x00050000
Oct 7 20:06:01 skywalker kernel: end_request: I/O error, dev sdb, sector 3970036
Oct 7 20:06:01 skywalker kernel: Buffer I/O error on device sdb1, logical block 3969809
Oct 7 20:06:01 skywalker kernel: Buffer I/O error on device sdb1, logical block 3969810
Oct 7 20:06:01 skywalker kernel: Buffer I/O error on device sdb1, logical block 3969811
Was mich etwas stutzig macht, sind die Buffer I/O errors.

Meine Frage: Wie kann ich denn jetzt die Kamera ggf. auch händisch mounten ?
Vielen Dank!
Stephan