EasyLinux Ubuntu

Hallo Uwe,

> Ich hatte nur im Hinterkopf, daß auf Deinem Rechner mehrere User existieren.

da hatte ich mich wohl falsch ausgedrückt.

Hallo Stefan,

> daß damit auch die Nutzung externen Programme, z.B. zur

> Mail-Filterung (spamassassin oder procmail) möglich ist.

das kann KMail auch, aber da web.de bereits 99,9...% herausfiltert, ist das

sogar überflüssig.

--

Viele Grüße,

Hartmut

Hungerhilfe: http://www.thehungersite.com

Ohne Zensur suchen:

http://suche.amnesty-bergedorf.de/

ökologisch suchen:

http://www.ecosia.de

Das heutige Motto:

Zu wissen, wie man etwas macht, ist nicht schwer.

Schwer ist nur, es zu machen.

_______________________________________________

Ubuntu mailing list

Ubuntu[bei]easylinux[punkt]de

http://www.easylinux.de/Kontakt/Mailinglisten/listinfo/ubuntu

Hallo Stefan,

> Ausgaben dann posten.

Hier ist das Ergebnis:

smartctl 5.41 2011-06-09 r3365 [i686-linux-2.6.38-2-686] (local build)

Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===

Model Family: Seagate Barracuda 7200.10

Device Model: ST3250620AS

Serial Number: 9QF1Z1FC

Firmware Version: 3.AAJ

User Capacity: 250,058,268,160 bytes [250 GB]

Sector Size: 512 bytes logical/physical

Device is: In smartctl database [for details use: -P show]

ATA Version is: 7

ATA Standard is: Exact ATA specification draft version not indicated

Local Time is: Wed Aug 3 19:27:12 2011 CEST

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED

General SMART Values:

Offline data collection status: (0x82) Offline data collection activity

was completed without error.

Auto Offline Data Collection: Enabled.

Self-test execution status: ( 0) The previous self-test routine

completed

without error or no self-test has ever

been run.

Total time to complete Offline

data collection: ( 430) seconds.

Offline data collection

capabilities: (0x5b) SMART execute Offline immediate.

Auto Offline data collection on/off support.

Suspend Offline collection upon new

command.

Offline surface scan supported.

Self-test supported.

No Conveyance Self-test supported.

Selective Self-test supported.

SMART capabilities: (0x0003) Saves SMART data before entering

power-saving mode.

Supports SMART auto save timer.

Error logging capability: (0x01) Error logging supported.

General Purpose Logging supported.

Short self-test routine

recommended polling time: ( 1) minutes.

Extended self-test routine

recommended polling time: ( 92) minutes.

SMART Attributes Data Structure revision number: 10

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED

WHEN_FAILED RAW_VALUE

1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail

Always - 215916245

3 Spin_Up_Time 0x0003 096 095 000 Pre-fail

Always - 0

4 Start_Stop_Count 0x0032 098 098 020 Old_age

Always - 2773

5 Reallocated_Sector_Ct 0x0033 097 097 036 Pre-fail

Always - 130

7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail

Always - 30213531982

9 Power_On_Hours 0x0032 096 096 000 Old_age

Always - 4068

10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail

Always - 0

12 Power_Cycle_Count 0x0032 098 098 020 Old_age

Always - 2935

187 Reported_Uncorrect 0x0032 001 001 000 Old_age

Always - 32856

189 High_Fly_Writes 0x003a 100 100 000 Old_age

Always - 0

190 Airflow_Temperature_Cel 0x0022 051 048 045 Old_age

Always - 49 (0 11 50 25)

194 Temperature_Celsius 0x0022 049 052 000 Old_age

Always - 49 (0 14 0 0)

195 Hardware_ECC_Recovered 0x001a 056 052 000 Old_age

Always - 55836040

197 Current_Pending_Sector 0x0012 100 100 000 Old_age

Always - 0

198 Offline_Uncorrectable 0x0010 100 100 000 Old_age

Offline - 0

199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age

Always - 0

200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age

Offline - 0

202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age

Always - 0

SMART Error Log Version: 1

ATA Error Count: 2343 (device log contains only the most recent five errors)

CR = Command Register [HEX]

FR = Features Register [HEX]

SC = Sector Count Register [HEX]

SN = Sector Number Register [HEX]

CL = Cylinder Low Register [HEX]

CH = Cylinder High Register [HEX]

DH = Device/Head Register [HEX]

DC = Device Command Register [HEX]

ER = Error register [HEX]

ST = Status register [HEX]

Powered_Up_Time is measured from power on, and printed as

DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,

SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2343 occurred at disk power-on lifetime: 4063 hours (169 days + 7 hours)

When the command that caused the error occurred, the device was active or

idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

10 51 01 2e 51 1c ed

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

37 00 01 2e 51 1c ed 00 02:51:13.413 SET MAX ADDRESS EXT

27 00 00 2e 51 1c e0 00 02:51:13.368 READ NATIVE MAX ADDRESS EXT

37 00 00 2e 51 1c ed 00 02:51:13.368 SET MAX ADDRESS EXT

27 00 01 2e 51 1c e0 00 02:51:13.367 READ NATIVE MAX ADDRESS EXT

37 00 01 2e 51 1c ed 00 02:51:17.586 SET MAX ADDRESS EXT

Error 2342 occurred at disk power-on lifetime: 4063 hours (169 days + 7 hours)

When the command that caused the error occurred, the device was active or

idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

10 51 01 2e 51 1c ed

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

37 00 01 2e 51 1c ed 00 02:51:13.413 SET MAX ADDRESS EXT

27 00 00 2e 51 1c e0 00 02:51:13.368 READ NATIVE MAX ADDRESS EXT

37 00 00 2e 51 1c ed 00 02:51:13.368 SET MAX ADDRESS EXT

27 00 01 6f 59 1c e0 00 02:51:13.367 READ NATIVE MAX ADDRESS EXT

29 00 01 6f 59 1c e0 00 02:51:13.367 READ MULTIPLE EXT

Error 2341 occurred at disk power-on lifetime: 4047 hours (168 days + 15

hours)

When the command that caused the error occurred, the device was active or

idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

10 51 01 2e 51 1c ed

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

37 00 01 2e 51 1c ed 00 01:22:48.188 SET MAX ADDRESS EXT

27 00 00 2e 51 1c e0 00 01:22:48.128 READ NATIVE MAX ADDRESS EXT

37 00 00 2e 51 1c ed 00 01:22:47.127 SET MAX ADDRESS EXT

27 00 01 2e 51 1c e0 00 01:22:47.090 READ NATIVE MAX ADDRESS EXT

37 00 01 2e 51 1c ed 00 01:22:47.090 SET MAX ADDRESS EXT

Error 2340 occurred at disk power-on lifetime: 4047 hours (168 days + 15

hours)

When the command that caused the error occurred, the device was active or

idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

10 51 01 2e 51 1c ed

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

37 00 01 2e 51 1c ed 00 01:22:48.188 SET MAX ADDRESS EXT

27 00 00 2e 51 1c e0 00 01:22:48.128 READ NATIVE MAX ADDRESS EXT

37 00 00 2e 51 1c ed 00 01:22:47.127 SET MAX ADDRESS EXT

27 00 01 6f 59 1c e0 00 01:22:47.090 READ NATIVE MAX ADDRESS EXT

29 00 01 6f 59 1c e0 00 01:22:47.090 READ MULTIPLE EXT

Error 2339 occurred at disk power-on lifetime: 4043 hours (168 days + 11

hours)

When the command that caused the error occurred, the device was active or

idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

10 51 01 2e 51 1c ed

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

37 00 01 2e 51 1c ed 00 03:24:12.695 SET MAX ADDRESS EXT

27 00 00 2e 51 1c e0 00 03:24:10.615 READ NATIVE MAX ADDRESS EXT

37 00 00 2e 51 1c ed 00 03:24:10.556 SET MAX ADDRESS EXT

27 00 01 2e 51 1c e0 00 03:24:10.339 READ NATIVE MAX ADDRESS EXT

37 00 01 2e 51 1c ed 00 03:24:10.278 SET MAX ADDRESS EXT

SMART Self-test log structure revision number 1

Num Test_Description Status Remaining LifeTime(hours)

LBA_of_first_error

# 1 Extended offline Completed without error 00% 4068 -

SMART Selective self-test log data structure revision number 1

SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS

1 0 0 Not_testing

2 0 0 Not_testing

3 0 0 Not_testing

4 0 0 Not_testing

5 0 0 Not_testing

Selective self-test flags (0x0):

After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.

> Unabhängig davon - wenn das mein Rechner/Festplatte wäre, dann würde der

> noch genau e_i_n_m_a_l hochlaufen:

> Zum sichern der Arbeitsdaten! Anschließend folgt der Einbau einer neuen

> Platte. Die letzte habe ich vorige Woche wegen viel weniger getauscht.  

Ja, ich weiß, Du bist da besonders vorsichtig, aber:

"wer nüscht riskiert, kommt nich nach Moabit" (altes Berliner

Ganovensprichwort)

--

Viele Grüße,

Hartmut

Hungerhilfe: http://www.thehungersite.com

Ohne Zensur suchen:

http://suche.amnesty-bergedorf.de/

ökologisch suchen:

http://www.ecosia.de

Das heutige Motto:

Die Leute, die niemals Zeit haben, tun am wenigsten.

_______________________________________________

Ubuntu mailing list

Ubuntu[bei]easylinux[punkt]de

http://www.easylinux.de/Kontakt/Mailinglisten/listinfo/ubuntu