Scanner Medion MD9693 unter Suse9.1, fehlende Firmware

Autor

Freitag, 20. August 2004 15:32:19

Bringe weder unter Suse9.0 noch 9.1 meinen Medion-Scanner MD9693 zum laufen. Unter Yast kann ich ihn zwar auswählen, bekomme aber stets eine Meldung, dass dieser Scanner das Einspielen einer "Firmware" erfordert.
Nun habe ich schon so manchen Hinweis in Newsgroups gefunden, hat aber alles nichts gebracht.
Ich vermute, dass die "Firmwaredatei" artec48.usb heisst. Die habe ich unter windows gefunden und in den Ordner /etc/sane.d/ kopiert.

Dort ist auch eine Konfigurationsdatei "artec_eplus48u.conf", in der einige Kommentare stehen, unter anderem dass der Pfad zu der Firmwaredatei zu setzen ist.
Habe ich auch gemacht:
option artecFirmwareFile etc/sane.d/Artec48.usb
Dann gibt's noch das:
#If you are using libusb, a device looks like this:
#device libusb:001:002
#If you are using the scanner module (kernel driver), a device looks like this:
#device /dev/usbscanner
Das interessiert YAST aber nicht, egal ob mit oder ohne Pfad, gleich welche devicezeile auskommentiert bleibt.
Kann mir jemand eine klare Hilfe geben, welche Datei (mit Namen) wo zu stehen hat, welche Datei (mit Namen) wo und wie zu editieren ist, dass der Scanner geht.

Anonymous User

2 Antworten


Antworten
Re: Scanner Medion MD9693 unter Suse9.1, fehlende Firmware
Martin Lehmann, Freitag, 20. August 2004 20:23:10
Ein/Ausklappen

Hallo,
ich hatte vor kurzem ein ähnliches Problem, jedoch benutze ich kein Suse.
Ich habe einfach die Firmware in den richtigen Ordner kopiert und XSANE (ich denke das geht auch mit jedem anderen Scanprogram z.B. Kooka) gestartet.
Mehr musste ich nicht machen. Hast Du es auf diesem Weg schon probiert?
Hier ist meine Konfigurationsdatei:
# artec_eplus48u - SANE Backend configuration file
# For use with the Artec E+ 48U scanner
# This scanner is also sold as
# Tevion MD 9693, Medion MD 9705, Medion MD 9693,
# Trust Easy Webscan 19200, Memorex Mem 48U or Umax AstraSlim SE.
#
# The USB section:
# each device needs at least the following line:
# usb vendor-ID and product-ID
# Every device configuration in this file must begin with an usb entry.
usb 0x05d8 0x4003

#
# Path to the firmware file
# This file comes with the Windows driver
# The scanner won't work without it
#

option artecFirmwareFile /etc/sane.d/Artec48.usb
option ePlusPro 0

#
# for adjusting the default gamma values
#

option redGamma 1.0
option greenGamma 1.0
option blueGamma 1.0
option masterGamma 1.9

#Use this options to set the default offset and exposure time values.

option redOffset 0x28
option greenOffset 0x2f
option blueOffset 0x2f
option redExposure 0xa7
option greenExposure 0x116
option blueExposure 0xdc

# The vendor and model string
# This string is displayed by the frontends. If you do not want to get your
# scanner reported as "Artec E+ 48U", then change the option accordingly.

option vendorString "Artec"
option modelString "E+ 48U"

#
# device-name
#
# If autodetection does not work, then you can specify the device here
# The device entry must be the last one in this config file (or the last one before a
# new usb entry).

#If you are using libusb, a device looks like this:
#device libusb:001:002

#If you are using the scanner module (kernel driver), a device looks like this:
#device /dev/usb/scanner0


# Another USB section:
# each device needs at least the following line:
# usb vendor-ID and product-ID
# Every device configuration in this file must begin with an usb entry.
# Since the Trust Easy Webscan 19200 uses a different product id, we add
# another usb section here.

usb 0x05d8 0x4006

#
# Path to the firmware file
# This file comes with the Windows driver
# The scanner won't work without it
#

option artecFirmwareFile /Artec48.usb

#
# for adjusting the default gamma values
#
option ePlusPro 1
option redGamma 1.0
option greenGamma 1.0
option blueGamma 1.0
option masterGamma 1.9

#Use this options to set the default offset and exposure time values.
#If calibrate device is set to 0, this values are used instead of the values
#which were calculated during calibration.

option redOffset 0x28
option greenOffset 0x2f
option blueOffset 0x2f
option redExposure 0xa7
option greenExposure 0x116
option blueExposure 0xdc

# The vendor and model string
# This string is displayed by the frontends. The Trust Easy Webscan 19200
# has a different product id, therefore we can overwrite the vendor and model
# string here.

option vendorString "Trust"
option modelString "Easy Webscan 19200"

#
# device-name
#
# If autodetection does not work, then you can specify the device here
# The device entry must be the last one in this config file (or the last one before a
# new usb entry).

#If you are using libusb, a device looks like this:
#device libusb:001:002

#If you are using the scanner module (kernel driver), a device looks like this:
#device /dev/usb/scanner0

# Another USB section:
# each device needs at least the following line:
# usb vendor-ID and product-ID
# Every device configuration in this file must begin with an usb entry.
# Since the Memorex Mem48U uses a different product id, we add
# another usb section here.

usb 0x05d8 0x4005

#
# Path to the firmware file
# This file comes with the Windows driver
# The scanner won't work without it
#

option artecFirmwareFile /Artec48.usb

#
# for adjusting the default gamma values
#

option redGamma 1.0
option greenGamma 1.0
option blueGamma 1.0
option masterGamma 1.9

#Use this options to set the default offset and exposure time values.
#If calibrate device is set to 0, this values are used instead of the values
#which were calculated during calibration.

option redOffset 0x28
option greenOffset 0x2f
option blueOffset 0x2f
option redExposure 0xa7
option greenExposure 0x116
option blueExposure 0xdc

# The vendor and model string
# This string is displayed by the frontends. The Umax AstraSlim SE
# has a different product id, therefore we can overwrite the vendor and model
# string here.

option vendorString "Memorex"
option modelString "MEM 48U"

#
# device-name
#
# If autodetection does not work, then you can specify the device here
# The device entry must be the last one in this config file (or the last one before a
# new usb entry).

#If you are using libusb, a device looks like this:
#device libusb:001:002

#If you are using the scanner module (kernel driver), a device looks like this:
#device /dev/usb/scanner0

# Another USB section:
# each device needs at least the following line:
# usb vendor-ID and product-ID
# Every device configuration in this file must begin with an usb entry.
# Since the Umax AstraSlim SE uses a different product id, we add
# another usb section here.

usb 0x05d8 0x4009

#
# Path to the firmware file
# This file comes with the Windows driver
# The scanner won't work without it
#

option artecFirmwareFile /Artec48.usb

#
# for adjusting the default gamma values
#

option redGamma 1.0
option greenGamma 1.0
option blueGamma 1.0
option masterGamma 1.9

#Use this options to set the default offset and exposure time values.
#If calibrate device is set to 0, this values are used instead of the values
#which were calculated during calibration.

option redOffset 0x28
option greenOffset 0x2f
option blueOffset 0x2f
option redExposure 0xa7
option greenExposure 0x116
option blueExposure 0xdc

# The vendor and model string
# This string is displayed by the frontends. The Umax AstraSlim SE
# has a different product id, therefore we can overwrite the vendor and model
# string here.

option vendorString "Umax"
option modelString "AstraSlim SE"

#
# device-name
#
# If autodetection does not work, then you can specify the device here
# The device entry must be the last one in this config file (or the last one before a
# new usb entry).

#If you are using libusb, a device looks like this:
#device libusb:001:002

#If you are using the scanner module (kernel driver), a device looks like this:
#device /dev/usb/scanner0

# Another USB section:
# each device needs at least the following line:
# usb vendor-ID and product-ID
# Every device configuration in this file must begin with an usb entry.
# This section is for the Artec E+ Pro
# Note, that the name of the firmware file is called 1200.usb for
# this device

usb 0x05d8 0x4004

#
# Path to the firmware file
# This file comes with the Windows driver
# The scanner won't work without it
#

option artecFirmwareFile /1200.usb

#
# Tell the backend that this is an Artec E+ Pro
# by setting the option ePlusPro to 1
#

option ePlusPro 1

#
# for adjusting the default gamma values
#

option redGamma 1.0
option greenGamma 1.0
option blueGamma 1.0
option masterGamma 1.9

#Use this options to set the default offset and exposure time values.
#If calibrate device is set to 0, this values are used instead of the values
#which were calculated during calibration.

option redOffset 0x28
option greenOffset 0x2f
option blueOffset 0x2f
option redExposure 0xa7
option greenExposure 0x116
option blueExposure 0xdc

# The vendor and model string
# This string is displayed by the frontends. The Umax AstraSlim SE
# has a different product id, therefore we can overwrite the vendor and model
# string here.

option vendorString "Artec"
option modelString "E+ Pro"

#
# device-name
#
# If autodetection does not work, then you can specify the device here
# The device entry must be the last one in this config file (or the last one before a
# new usb entry).

#If you are using libusb, a device looks like this:
#device libusb:001:002

#If you are using the scanner module (kernel driver), a device looks like this:
#device /dev/usb/scanner0

Bei mir liegt die Firmware allerdings in /etc/sane.d das kann aber ändern.



Bewertung: 74 Punkte bei 16 Stimmen.
Den Beitrag bewerten: Gut / Schlecht
-
Re: Scanner Medion MD9693 unter Suse9.1, fehlende Firmware
Christoph , Samstag, 21. August 2004 09:47:00
Ein/Ausklappen

und noch ein paar hilfreiche links:

[1] http://www.linux-community.de/Neues/story?storyid=5309
[2] https://portal.suse.com/PM/...s&m=25&l=de&x=true
[3] https://portal.suse.com/PM/...s&m=25&l=de&x=true



Bewertung: 102 Punkte bei 14 Stimmen.
Den Beitrag bewerten: Gut / Schlecht

Ähnliche Artikel

Tipp der Woche

Ubuntu 14.10 und VirtualBox
Ubuntu 14.10 und VirtualBox
Tim Schürmann, 08.11.2014 18:45, 0 Kommentare

Wer Ubuntu 14.10 in einer virtuellen Maschine unter VirtualBox startet, der landet unter Umständen in einem Fenster mit Grafikmüll. Zu einem korrekt ...

Aktuelle Fragen

PCLinuxOS Version 2014.08 "FullMonty" Umstellung auf deutsch
Karl-Heinz Welz, 19.12.2014 09:55, 3 Antworten
Hallo, liebe Community, ich bin 63 Jahre alt und möchte jetzt nach Jahrzehnten Windows zu Linux...
ICEauthority
Thomas Mann, 17.12.2014 14:49, 2 Antworten
Fehlermeldung beim Start von Linux Mint: Could not update ICEauthority file / home/user/.ICEauth...
Linux einrichten
Sigrid Bölke, 10.12.2014 10:46, 5 Antworten
Hallo, liebe Community, bin hier ganz neu,also entschuldigt,wenn ich hier falsch bin. Mein Prob...
Externe USB-Festplatte mit Ext4 formatiert, USB-Stick wird nicht mehr eingebunden
Wimpy *, 02.12.2014 16:31, 0 Antworten
Hallo, ich habe die externe USB-FP, die nur für Daten-Backup benutzt wird, mit dem YaST-Partition...
Steuern mit Linux
Siegfried Markner, 01.12.2014 11:56, 2 Antworten
Welches Linux eignet sich am besten für Steuerungen.

Jetzt auf den Mailinglisten

Re: [EasyLinux-Ubuntu] OS_13.2_mate_caja_multiple_Instanzen_(hier_erstmal_gelöst)
Heinz-Stefan Neumeyer, 20.12.2014 00:44
Am Freitag, den 19.12.2014, 19:43 +0100 schrieb Richard Kraut: Hallo Richard > > Ich kenne Dich je...
Re: [EasyLinux-Ubuntu] Bilder im Internet lagern
Joerg Guenther, 19.12.2014 20:42
Hallo Stefan. Hallo Gerhard Am 19.12.2014 um 16:33 schrieb H.-Stefan Neumeyer: > Am Freitag, 19. Dezembe...
Re: [EasyLinux-Ubuntu] Bilder im Internet lagern
Gerhard Blaschke, 19.12.2014 20:22
Am 19.12.2014 um 17:45 schrieb Karl-Heinz: > Am Fri, 19 Dec 2014 17:22:22 +0100 > schrieb Gerhard Bla...
Re: [EasyLinux-Ubuntu] Suchmaschine: Was ist das denn?
Rainer, 19.12.2014 20:09
Hallo Hartmut, Am Fri, 19 Dec 2014 18:06:38 +0100 schrieb Hartmut Haase : > > > den Effekt hab...
Re: [EasyLinux-Ubuntu] DVD abspielen
Richard Kraut, 19.12.2014 20:03
Am Freitag, den 19.12.2014, 19:14 +0100 schrieb Hartmut Haase: > wenn ich bei Win7 eine DVD einlege, werde...